by Kelly Baggett
Foundational Principles
1. The greatest problem in natural bodybuilding is, in my opinion, the alarming number of people that screw up perfectly good training with poor nutrition. based on my observations, the majority of severe and semi-serious trainees leave their workouts having done enough to stimulate growth, yet big muscle mass increases typically require dedicated eating to take advantage of that stimulation. If you’re not ready to buckle down and take a hardcore attitude when it pertains to your nutrition, you might as well stay the heck out of the gym.
2. The 3 S’s are crucial for muscle growth.
These are stimulate, supply, and signal. training “stimulates” growth, eating “supplies” material for growth, and your levels of various anabolic hormones “signal” growth to occur. Therefore, muscle mass gains are about 1/3 hormonal, 1/3 eating and 1/3 training. combine them together and they combine for a synergistic effect. See: keys to muscle Growth
3. how powerful is the anabolic effect by itself?
In one study testosterone use alone was shown to stimulate up to a 17 pound increase in muscle mass over a 20 week period of time in the absence of any training. Additionally, the average male will get around 40 pounds of natural muscle during puberty in the absence of any training just due to changes in his hormone levels. If you want to surpass those results naturally and you’re not going through puberty, you better figure out what you’re doing.
4. Partitioning refers to what happens when excess calories are consumed. Are they directed into muscle or fat stores?
The worse your partitioning, the a lot more fat you get when you get weight. The better your partitioning, the a lot more muscle you gain. This is mainly impacted by training and diet, yet with those things being a given, how well you “partition” is mostly figured out by levels of various hormones, which is figured out by genetics.
5. maximizing Partitioning
A natural trainee can maximize environmental aspects that affect his partitioning by training at the ideal frequency with the ideal type and dosage of training, eating enough food, sleeping enough, staying relatively anxiety free, and keeping his body composition within his “optimum muscle building window” which, normally speaking, is between the range of 10-17% body-fat for a lot of males and 12-20% for a lot of females. At less then about 10% body-fat, levels of various anabolic hormones such as testosterone go to crap, (unless you were born at 5% body-fat). At the other end, anymore then 17% body-fat and sensitivity to various anabolic hormones goes down the drain.
6. Nutrition
How powerful is the effect of eating? Studies have been done on overfeeding where people were fed an additional 1000 calories per day for 100 days without any training whatsoever. Of the weight they gained, even in the absence of exercise, an average of 35% was lean muscle mass.
7. genetic Limits
“Genetic limits” really refers to how much muscle mass a person can carry at a given body-fat percentage and not how much muscle mass they can carry overall. Your “genetic natural limit” while maintaining a lean 6% body-fat might be 200 lbs. but if you train and eat your way up to a 300-pound bodyweight, sure as hell you will be carrying a lot more then 200 pounds of muscle. This is why the greatest sumo wrestlers, who do little besides eat, on average carry a lot more muscle mass then the greatest bodybuilders. That’s not a recommendation to go out and get as fat as an oversized water buffalo, but it is reality.
Training Principles
Growth is stimulated from a combination of tension, total work, and fatigue. As we’ll see in a minute, outside the boundaries of very low volume programs, progressively boosting tension at a given level of work is the primary stimulus for ongoing gains in growth. aspects related to fatigue might add around 10% to that.
1. Tension
To get maximal tension on all available muscle fibers in a given muscle requires full motor unit recruitment in that muscle. This can occur 2 ways:
A: lifting a heavy load (80%+) so that all the muscle cells are firing from the first rep. (example: lifting an 80% load for 5 reps)
B: lifting a light load in a fatigued state so that your muscles “think” the load is heavy. (example: Lifting: a 50% load with short rest intervals and having the weight feel heavier then your ass after a 5 mile run.)
Anytime you put forth a maximal effort and have to really strain to step the weight, regardless of the weight on the bar, all the muscle fibers in the working muscle turn on and “tense up.” This is tension. get a muscle fiber to “tense up” often enough in a workout and it gets damaged. Your muscles don’t know how much weight they’re lifting, they only know they’re working. It’s not necessarily the weight that induces hypertrophy but what the muscles “go through” while lifting a weight.
2. What’sthe difference between heavy vs light loads for tension?
Having said that, there is a difference between lifting a light load in a state of fatigue that “feels” heavy, and a load that “is” heavy. The main difference between the 2 is the heavy load will induce earlier recruitment of the fast twitch fibers and a lot more eccentric microtrauma during the lowering phase of a movement, which is the primary stimulus for growth of muscle protein myofibrills, while the lighter load lifted in a state of fatigue, often associated with a lot more repetitions, will tend to induce a lot more growth through boosted “energy and water storage” mechanisms.
3. Making strength increases and getting stronger over time
Is all about boosting tension, while getting a “pump” is a lot more about total work and fatigue. Suffice to say, the heavier weight you lift with a muscle or muscle group, the a lot more tension you create in that muscle. Your muscles become damaged under tension and repair themselves by getting a little bigger so that they can better resist the load.
4. The “pump”
The a lot more total work and momentary fatigue (due to lack of oxygen), you create in a muscle, (through high volume training, high rep sets, drop sets, static holds, rest-pause etc.) the bigger the “pump” you tend to get. These methods are typically associated with various “Weider” principles.
5. total work
Total work refers to the total time a muscle is under tension and how much tension it’s under over the course of an entire workout, which is generally the same thing as volume, which is sets x reps x load.
Work = sets x Reps x Load
Simply put, think of “total work” as the total number of reps you do for a body-part per session and how much weight you lift during those reps. how crucial is it? Well, undoubtedly it has some importance, otherwise all you’d need to to get big is generate a 1 second maximal effort isometric contraction a couple of times per week, which clearly isn’t the case, so we have to look at the value of total work. There are 2 ways to increase the work:
A: lift a lot more weight for a given number of reps.
B: do a lot more reps with a given weight.
5a. boosting work though boosting bar weight, while keeping the number of repetitions per workout relatively constant, has shown dramatic improvements in hypertrophy, yet boosting the number of reps without intentionally ever trying to increase the load has a much larger influence on the endurance and metabolic efficiency of the muscle cell. Thus, for pure gains in solid muscle mass, gradually boosting bar weight while maintaining a certain number of reps per workout is key.
5b. how lots of reps is enough?
The research and real world observation seems to indicate 25-50 reps twice a week for a body-part is plenty. any a lot more then 50 twice per week and some people may have issues with recovery. What seems to be the most crucial aspect is that a “minimal” amount of volume is maintained and not to intentionally seek out humongous increases in this area. At the volume a lot of bodybuilders train with (A minimum of 4 sets of 8 reps per bodypart twice per week), the minimums are met and it’s really a non-issue.
6. When is not getting enough work in an issue?
Realistically, unless you’re referring to idiotic style Mentzer type hit routines, (5 total reps per bodypart once a week or whatever), adding a crapload of volume just to get a lot more total work in isn’t gonna make much of a difference in the big scheme of things and is not nearly as crucial as the boosting bar weights that you lift. Some idiots will use extreme examples to verify their point that total work and volume is very crucial and give examples why bodybuilders shouldn’t train with heavy weights. They’ll use idiotic examples such as comparing one person who lifts 400 lbs on the squat for 5 total reps per week and another who lifts with 250 lbs for 50 reps per week. will the 250 pound squatter get better results? probably so, but realistically speaking, who the heck only does 5 total reps per week for a bodypart? Hell, even a powerlifter will get 20 or 25 reps in for a bodypart twice week. Now, if we compare a program where one person lifts 350 pounds per week for 40 reps and the other person lifts 400 pounds for 26 reps I’d put my money on the 2nd guy. but enough nonsense. A good general recommendation is to always keep the reps per workout around the same while you add bar weight over time as you get stronger. here is an example of how you might do that over the course of a 9 week mesocycle:
Week 1-3 – sets of 8-10 (ex: 3 x 8-10)
Week 4-6 – sets of 6-8 (ex: 4 x 6-8)
Week 7-9 – sets of 4-6 (ex: 5 x 5)
Week 9 (unload – 2 sets of 12-15 easy)
Week 10-12 start over with sets of 8-10
See how the number of reps stays around 25 while the rep range decreases?
6a.What is the ideal repetition range?
Sets with as few as 1 reps per set and as lots of as 20 reps per set can both be effective. keep in mind the total number of reps per workout is also key. With total reps being equal, the heavier loads will tend to stimulate a lot more growth yet also require a lot more sets. (8 sets of 3 vs 3 sets of 8). Quadriceps in particular seem to respond better to higher reps. (8-20 reps per set)
7. tension vs Fatigue
Results that come from tension take place over a long period of time and tend to stick around for a long period of time. results that come from “fatigue” (a.k.a. – the “pump”), occur much quicker and dissipate just as quickly.
8. different adaptations to tension vs fatigue
It could be said that a muscle will adapt to tension by adding a lot more protein to it’s structures to deal with that tension. The muscle adapts to fatigue by storing a lot more “energy” (aka – glycogen.) to better deal with the fatigue induced. The amount of extra glycogen storage that can be stimulated with even very brief bouts of fatigue training (a triple drop set for example), is very impressive, nearly rivaling that Camiseta Kashima Antlers of certain short-term endurance protocols created to double glycogen storage increases.
9.Fatigue makes muscles “swole”
Although the growth that occurs from fatigue only accounts for maybe 5-10% of the size increases, it gives the impression of contributing a lot a lot more then that, considering that the glycogen storage increase and training methods associated with it also give one a incredible and immediate “pump.” That pump, which occurs from blood engorging the tissue, can temporarily increase the size of a muscle by probably 20%. (which is why you never measure your arms cold or carb depleted).
10. If you increase your muscle mass by 50 lbs
About 45 pounds of that mass will come about through improvement in tension related processes, and about 5 pounds will be from “fatigue” processes. However, the extra 5 pounds of fatigue related growth will be very “pretty.”
11. The Recipe
Take a bodybuilder and give him a heavy dose of progressively boosting muscle tension over a long period of time, along with some Camiseta Selección de fútbol de Japón fatigue, big eating, and big scale weight increases, and you get a really big bodybuilder with round and full muscles
12. A real Life Example
Let’s say you take a 250 pound powerlifter at 10% body-fat who has only trained with singles, doubles, and triples his entire life, (and thus only dealt with low volume “tension” related growth). Let’s say he had taken his bodyweight from a natural 150 when he first started lifting and ate and trained his way up to a 250-pound powerhouse. Now, lets say you decide to convert him to standard bodybuilding training by having him train with a lot more volume, a lot more “fatigue” training, and a lot more total work for all his major muscle groups (such as a lot more sets overall, higher rep sets, volume training, drop sets, rest-pause etc.). With all that additional bodybuilding stuff and without changing his diet, you might be able to put an additional 10 or 15 pounds of muscle mass on him (100 pounds lean muscle mass gained plus ~10%). about half of that extra mass would occur within weeks and it would be related to an boosted ability he has to store muscle glycogen. The other half of that 10 or 15 pounds would be “real” muscle that would come about from the boosted workload. Both of those would pale in comparison to the gains he had already made simply taking a no holds barred low volume powerlifting technique to making strength gains over time, but those standard “weider” methods would put a pretty great “finishing touch” on his physique.
13. Bar Weight increases plus scale Weight increases are Key
Strength gains manifested through bar weight increases plus scale weight increases Camiseta AS Monaco are key. The one who makes the most continual strength improvements and scale weight increases over time, also gains the most muscle mass in the shortest time.
14. Neural strength Gains vs Structural strength Gains
Strength can be gained from increases in neural efficiency or it can be gained from incr